SPECIALTY PRODUCTS
CLEAR-VU LEGACY LIGHTING
VerticaLED: Emergency & Specialty Lighting
24 VDC, flexible, opal encapsulated, IP67 protected LED light lines with a cross section of 0.39” x 0.81” (w x h) and vertical bending direction (top view). 3M self adhesive tape on rear side. Homogeneous and dot free illumination with very low installation depths. Can be delivered in lengths of 2, 4, 6, and 8 feet. Custom length available upon request.
IP67 plug in connectors on both ends. At maximum length only one side with IP67 plug in connector male, no female connector. Standard leader cable 6’ length with female IP67 connector included. Lifetime of greater than 60,000 hours (L80/B10). Easy installation and a rugged design for harsh environments. Consult factory if dimming is required.
SPECIFICATIONS & FEATURES
DIMENSIONAL DATA & PHOTOMETRICS
METRO Tube 8Accessory & Specialty Lighting
The most advanced LED tube lamp designed specifically for transit applications. Offers class leading efficacy, 360° illumination, single pin configuration (theft resistant), and direct line voltage input. Fixture tested to rigorous surge, EMI, shock, and vibration standards. Listed for use in new and retrofit applications.
SPECIFICATIONS & FEATURES
High Efficiency Direct AC Design – connects directly to 95-295VAC input, no ballast or driver required. 140+ lumens per watt delivered.
Shatter-Shield Glass – maintains structural integrity over life of the tube, no requirement for waterproof seal between aluminum body and plastic lens typical to LED tubes.
360° Illumination – emits light in all directions unlike most LED tubes that have an aluminum back plate which limits distribution to 180-220° typically.
Safe Switch – embedded ASIC monitors connection between terminal pins to eliminate risk of electrical shock hazard during installation.
Mariner LED: Accessory & Specialty Lighting
Corrosion & waterproof! The Mariner is designed for environments requiring a rugged vandal resistance luminaire. This fixture is ideal for usage in prisons, detentions centers, subways, tunnels and public restrooms in parks, and and other unsupervised areas.
The luminaire consists of a high-pressure die-cast marine grade aluminum body with a robust polycarbonate diffuser and is designed to operate LEDs of up to 46W. It is specifically designed for surface mounted applications. Due to its low profile, only 3 ¾” inches high, the Mariner complies with ADA regulations.
SPECIFICATIONS & FEATURES
Vandal resistant single piece injection molded UV stabilized clear polycarbonate.
Secure to the body by six marine grade 316 stainless steel allen head socket screws.
Tamper proof screws with center pin are available upon request. Gear tray with suspension hanger
SERIES 4061A LED Panel Light Fixture: Specialty Lighting
DIMENSIONAL DATA & MOUNTING POSITIONS
SPECIFICATIONS, FEATURES & PHOTOMETRICS
