The advent of LED technology has presented mass transportation authorities with “not-so-good, better, best” choices for upgrading subway tunnel lighting.The “not-so good” choice removes the antiquated light source from an outdated lighting fixture and replaces it with an LED bulb. This “horseless carriage” approach, puts new technology into outdated and inadequate fixtures. The “better” choice removes and replaces the light source and optics. This approach acknowledges that the light source must control lumen distribution in order to be effective and efficient. The “best” choice is a new lighting fixture designed specifically for the LED light source. The new lighting fixture provides controlled lumen distribution and is designed to maximize lighting performance and minimize operational and maintenance costs.
Maximized Performance – Outstanding lighting levels with reduced energy and no maintenance! The Metro Track Light significantly surpasses NFPA 130 lighting level standards enabling track work and maintenance without auxiliary lighting in most applications. In addition, the Metro Track Light reduces operational costs, eliminates maintenance and is guaranteed for 5 years.
Consumes Less Than 32 Watts
~5fc at 25’ spacing, greatly exceeding NFPA requirements
Eliminates lamp replacement maintenance
Quick-install mounting system is as fast as a “bulb change”
Guaranteed 5-year life cycle
DIMENSIONAL DATA & MOUNTING MEASUREMENTS
PHOTOMETRICS & VALUE CHART
SERIES 4098-2 LED Tube Downlight: Station Lighting
2-lamp LED Tube Corner Mounted Downlight with T8 retrofit tubes, pendant or surface mounted with vandal resistant lens.
DIMENSIONAL DATA & MOUNTING POSITIONS
SPECIFICATIONS, FEATURES & PHOTOMETRICS
Housing:
Extruded aluminum 1/8” thick low-profile housing
Lens:
0.38” THK Cast Polycarbonate, Clear
Lumen Output:
4’ tube – 2,700 Lumens.
Electrical:
Universal 90-277VAC
Operating Range:
-25° to 50°
Listings & Certifications:
UL Listed, Wet location, IP65, & IK10 ratedwith lens.
Features:
Integral splice compartment.
Reflector:
1/8” Extruded Aluminum, 94% Reflectance
Socket Saddle:
1/8” Aluminum, baked gloss white finish.
Cable Hinged Vandal Lens:
0.38” Thick flat clear polycarbonate – Gasketed.
Socket:
Single pin stationary one end, single pin telescopic other end.
Compartment Divider:
1/8” Thick aluminum.
Housing End Plate:
3/8” Thick machined aluminum, finish to match housing – Gasketed.
Lamp:
(2) LED Tube light sources with integral high efficiency drivers, >50,000 hours.
Screws:
#8-32 (T15) Flat head S.S. tamper-resistant countersunk and captive.
Clevis Hanger:
3/16” Thick aluminum, finish to match housing. Corner, (2) 1/4-20 x 1” set screw. Minimum (4) per unit.
Lamp Clip: (1) per lamp.
Fuse:
In-line.
5 Year Warranty
Made in USA
LED Hybrid Emergency Panel Light Fixture: SL3923-71: Station Lighting
DIMENSIONAL DATA & MOUNTING POSITIONS
SPECIFICATIONS, FEATURES & PHOTOMETRICS
Housing:
Extruded aluminum 1/8” thick low-profile housing
Lens:
0.38” THK Cast Polycarbonate, Clear
Electrical:
Universal 90-277VAC
Operating Range:
-25° to 50°
Listings & Certifications:
UL Listed, Wet location, IP65, & IK10 rated with lens.
Features:
Integral splice compartment.
Reflector:
1/8” Extruded Aluminum, 94% Reflectance
Socket Saddle:
1/8” Aluminum, baked gloss white finish.
Cable Hinged Vandal Lens:
0.38” Thick flat clear polycarbonate – Gasketed.
Socket:
Single pin stationary one end, single pin telescopic other end.
Compartment Divider:
1/8” Thick aluminum.
Housing End Plate:
3/8” Thick machined aluminum, finish to match housing – Gasketed.
Lamp:
(2) LED Tube light sources with integral high efficiency drivers, >50,000 hours.
Screws:
#8-32 (T15) Flat head S.S. tamper-resistant countersunk and captive.
Clevis Hanger:
3/16” Thick aluminum, finish to match housing. Corner, (2) 1/4-20 x 1” set screw. Minimum (4) per unit.
Lamp Clip:
(1) per lamp.
Fuse:
In-line.
5 Year Warranty
Made in USA
LED Panel Light Fixture: SL3923-69: Station Lighting